load the recorder drives with high quality blank CD-R media. Press the ‘ENT’
button to start the process, the unit will analyze the master on the (Src)
drive, and then any disc in the recorder drives.The LCD will display number of
discs that passed the test and then go directly to doing the copy. Upon doing
a successful test and copy the following will display on the LCD.
In this example two discs were successfully tested and copied.
If the target CD-R has already been written to, or is damaged and cannot be
written to, the drive for this disc will not open. Likewise, if the data on the
master CD will not fit on the blank target CD the drive will remain closed.
4. V
ERIFY
The verify function is used to confirm that the master and the copy read the
same. Again this function operates similarly in both the hard drive to disc and
the disc to disc mode
1. Select the function using the up and down arrows.
2. In the hard drive to disc mode: load the drives with the copied discs. The unit
will analyze the master on the hard drive, and then compare that to any disc
loaded in the recorder drives. The LCD will display the number of discs that
verified correctly and the number that failed the verification. Those that veri-
fied correctly will be ejected from the recorders. All failures will remain in the
drives.
3. In the disc to disc mode: Load the top drive (Src) with the master disc and
load the recorder drives with the previously written media. Press the ‘ENT’
button to start the process, the unit will analyze the master in the (Src)
drive, and then any disc in the recorder drives.The LCD will display the num-
ber of discs that verified and the number that failed. Those that verified cor-
rectly will be ejected from the recorders. All failures will remain in the drives.
In this example, three discs verified correctly and one disc failed the verifica-
tion.
The “F->” indicates that by pressing the ‘ENT’ button the failed disc(s) will be
ejected from the recorders. Please be careful to remove the correctly verified
disc(s) before pressing ‘ENT again.
To verify more duplicated discs simply fill the recorders and press ‘ENT,
again.
5. C
OMPARE
The compare function takes the verify function one step farther, it gives details
about the master and copied disc. It also, ejects the disc upon a successful
comparison.
1. Select the function using the up and down arrows.
2. In the hard drive to disc mode: load the drives with the copied discs. The unit
will analyze the master on the hard drive, and then compare that to any disc
loaded in the recorder drives. The LCD will display the number of discs that
compared correctly and the number that failed. Those that passed the com-
parison will be ejected from the recorders. All failures will remain in the
drives.
3. In the disc to disc mode: Load the top drive (Src) with the master disc and
load the recorder drives with the previously written media. Press the ‘ENT’
button to start the process, the unit will analyze the master on the (Src)
drive, and then any disc in the recorder drives. The LCD will display the num-
ber of discs that compared correctly and the number that failed. Those that
passed the comparison will be ejected from the recorders. All failures will
remain in the drives.
08
1-800-237-6666
www.discmakers.com
T
3. Test and Copy
OK: 02
4. Verify
F->
OK: 03
Fail: 01
