The ReflexPro is a high performance CD-R disc duplicator designed for both the
novice and professional user. It is designed for a variety of applications that
require the exchange of audio, video or data content. The following is a User
Guide that outlines the menu commands of the unit and immediate functions
of the unit. For additional technical support please call
888-800-4041
.
GETTING STARTED
Carefully remove the CD-R duplicator from its shipping container. Please
inspect the contents and verify them against the packing slip. Be sure to report
any errors in shipping immediately to Disc Makers.
Packing materials:
Please save the original box and packaging in the event the
unit requires future service or you need to move the unit from one location to
another. This will help reduce the possibility of damage in transit.
Please Note:
Any item that needs to be returned for a warranty repair must be
returned in original packaging.
I
NSTALLATION AND
S
ETUP
1. Unpack the ReflexPro to a clean and cool work area. Keep the external pack-
aging for future storage and transportation.
2. Place the ReflexPro on a flat, clean and dust free surface.
3. Connect the power cord from the back of the unit to an electrical outlet. Do
not bypass the Ground.
4. The Front panel should appear as below.
M
ODES AND
C
OPYING
M
ODES
The ReflexPro is able to duplicate in two different modes: hard drive to disc and
disc to disc. The unit is factory preset to hard drive to disc. This mode is effi-
cient for duplicating large numbers of discs. The hard drive to disc copies the
master to the hard drive and then copies the data to each of the drives. This
insures an exact copy of the original master to every disc.
The disc to disc mode will copy whatever is in the source (Src) drive to blank
media in the other drives in the unit. This mode is most effective for making
quantities of discs less than the number of drives in the unit. For the
ReflexPro4 if the need is for three discs or less, use the disc to disc mode. For
the ReflexPro7 if the need is for six discs or less, use the disc to disc mode.
Only slight changes will occur in the functions of the unit when the different
modes are chosen. When the unit is in the hard drive to disc mode ‘P: A’ will
appear at the right side of the first line of the LED. ‘P’ indicates the master disc
will be written to the hard drive and the next letter indicates which partition will
be written to.
H
ARD
D
RIVE TO
D
ISC
C
OPYING
Upon powering up the ReflexPro the LCD screen should appear as below:
1-800-237-6666
www.discmakers.com
T
05
1. Copy
P:A
