www.discmakers.com 1-800-237-6666
37
The EliteMicro should move to the input spindle, pick up the first CD (your master) and place it into
the recorder. The image on the CD will be copied to the hard drive. Then the CD master will be
removed from the drive and placed onto the output spindle. The EliteMicro will pick up a blank disc
and insert it into the recorder. The image will be recorded onto the media. Next, the EliteMicro will
pick the recorded disc from the drive, move it to the top of the column, and wait for the on-disc printer
to open. The recorded CD will be placed into the printer tray and the CD will be printed. After printing,
the EliteMicro will pick up the CD from the printer and place it into the output spindle. It will repeat this
and the cycle will continue until all 25 copies are completed.
If the unit is trying to use a CD recorder on your PC, please read the Using Drive Assigner section
located on page 27 of this guide for some steps to correct the problem.
Please observe the operation and verify that everything works smoothly. If you encounter any
problems, back track and review your steps. If you are unable to resolve the problem, please call our
tech support team toll free at
1-888-800-4041
.
