background image

- No maintenance or repair work should be carried out on the machine unless it is 
disconnected from the mains 

fi

 rst.

- We recommend every 4-5 years a general check of the electric motor, the bea-
rings, cables including a replacement set of brushes if necessary and a new 

fi

 lter 

should be installed.

6.2 Ordinary maintenance

All these operations are to be carried out on the machine disconnected from the mains 

fi

 rst and when the cleaner is chilled from the surrounding temperature. This mainte-

nance is made to keep the cleaner working properly and to extend the lifetime of the 
cleaner. Disconnect the mains 

fi

 rst also to clean the cleaner outside and pay attention 

that the dust canister is properly 

fi

 xed on the cleaner’s body.

EMPTYING OF WAST CONTAINER

1.Unclip the waste unit from the machine

2.Remove the cyclonic separator and 
bag support frame

3. Empty the waste container or replace 
the plastic bag. 
Cod. ER627 x Mod.EVO 200/550

4.Reassemble the cyclonic separator 
and the bag support into the waste con-
tainer ensuring all parts are clean and 
not damaged.

5. Carefully place the waste container 
up to the bottom of the machine in or-
der to make a good seal. (Close both 
clamps together) 

47

Summary of Contents for evo 200





















Reviews: