5. Operation
The cleaner is manufactured in order to minimize the output of noise both in the body
as in the motor. During the use please pay attention to the following advices:
Do not allow children to operate the machine without surveillance
Do not allow the suction of the handle to come into contact the eyes or ears.
Do not insert
fi
ngers in the handle.
Pay attention to the ceasing of the cleaner.
Due to the depression in the tubing and in the motor, the system remains under
depression for a couple of seconds after switching it off.
Disan take no responsibility for any harm or damage done due to misuse of the
machine
5.1 USE OF ACCESSORIES
1) Place the appropriate ends together: Into the handle; into the
2 chrome plated extension tubes or into the chrome plated te-
lescopic pipe.
2) Lift the cover of the inlet valve and place the metal end of the
vacuum hose.
3a) If an automatic inlet valve is being used the system will start
when the vacuum hose is pressed into the valve.
3b) If using a semi automatic system, the machine starts when
the hose end with the metal collar is placed into the inlet valve or
when the switch is operated on the handle.
4) In the event of excessive suction make use of the pressure
regulation on the curved connection
5) When vacuuming is
fi
nished the machine can be switched off
by removing the hose from the inlet valve and carefully closing
the cover.
6. MAINTEINANCE
6.1 TECHNICAL ADVICE
- If during operation you experience an irregularity that is not dealt with in section
“maintenance of the vacuum machine” please switch off the machine and get it
inspected by a quali
fi
ed person.
•
•
•
•
•
•
•
46