Operating Instructions
DISAG RM IV
Operating Instructions DISAG RM IV Seite 17
If a series is to be broken off, this is possible when the total scores are displayed (see
above). This series can then be broken off by means of the CLEAR key, which means to
say that both the total score and the number of hits in the series will be set to 0.
The shots are evaluated in the given sequence from front to back and from left to right in
direction in which the target is inserted. This evaluation sequence is generally valid as far
as the
DISAG RM IV
is concerned.
The scores for each target will be printed on the target in the given evaluation sequence as
soon as the printer is switched on. The 10-shot interim scores are marked with "Z" on the
printout. Moreover, the final scores are printed on the last target in a series and marked
with "
" (total). The various scores are marked with "*" in the case of multiple hits. In this
case the given evaluator (competition judge) must be asked to check the target to confirm
the correctness of the scores.
Sometinmes it can be, that there is no score evaluation possible ( for example no shot on
the target, to many shots on a AR-target or a to short broken AR-band ). Then the user will
be asked to enter the missing results by hand, so that a series will be complete. The
manual results are marked with
the ‘#’
-sign.
Target : 7
0.* R
If a target is inserted again after the completion of a series, the evaluation of the series
starts from the beginning again. The previously completed series is to be deleted with the
CLEAR key to be certain that in actual fact a new series is being commenced. Missing
shots in the case of a
not completed
series will otherwise only lead to a wrong score in
the following series.
The type of target cannot be changed once a series has been started. If a wrong type of
target has been inserted then the target will be rejected and run out of the machine
backwards and the following fault message will appear on the display:
No change of
Types in series
