background image

Warranty & Specifications 

IMPORTANT NOTICE

We, the manufacturer, reserve the right to change the product and/

or specifications in this manual without notification. The manual is for 

information usage only and the pictures and drawings depicted herein are 

for reference only.

Warranty Repair and Service

Do not return this product to the store for warranty issues or repair. Call 

our customer service department at 720-287-5182,  1-877-487-8275,  or 

visit www.dirtyhandtools.com for the location of the nearest service center.

Record the information below for future reference.

Model No.
Serial No.
Date of Purchase
Place of Purchase

Specifications

SKU/Part No. 

104306

 Description 

Hand Held Post Hole Digger

 Engine 

52cc, 2-stroke

 Fuel 

25:1 Gasoline to 2-cycle engine oil

 Fuel Tank Capacity 

27 fluid ounces (0.8L)

 Auger Diameter 

8 inches diameter

 Maximum Engine Speed 

9500rpm

 Idle Engine Speed 

2700rpm

 Auger Speed 

110-280rpm

 Shear Bolt 

Replaceable, on driveshaft

 Augers 

4 in. auger, part # 104881

  

6 in. auger, part # 104882

 

8 in. auger, part # 104383 (original replacement)

 

10 in. auger, part #104884 

 Shipping Weight 

35 lbs

 Warranty 

2 Year Limited Warranty

1100 W 120th Ave., Suite 600

Westminster, CO 80234 • 720-287-5182

Dirty Hand Tools® is a brand of

For Service or Questions

Call 1-877-487-8275

720-287-5182

www.dirtyhandtools.com

Summary of Contents for 104306













Reviews: