Dirty Hand Tools 101087, Operation Manual

Page: 8 / 24

8
Unpacking and Setup
Unpacking
1. Remove the power washer, the handlebar, high pressure
hose, spray gun, lance and color-coded nozzles from the
shipping container. If you are missing any items, please call
Dirty Hand Tools Customer Service at 1-720-287-5182.
2. Fill out and send in enclosed registration card. Write the
model number, serial number & date of purchase to ensure
warranty registration and keep a copy for your records.
Assembly
Read entire operator’s manual before you attempt to assemble
or operate the power washer.
Attaching the Handlebar
1. Place handlebar onto handlebar supports. Align the holes
and push the carriage bolt through both the support and
the handlebar then add the curved retaining washer and
thread on the knob and tighten. Repeat for both sides of the
handlebar with the knobs to the outside.
Inserting the Color Coded Nozzles
1. Align the appropriate color coded nozzle with the matching
color receptacle and push into place on the nozzle holder
assembly attached to the upper handlebars.
CARRIAGE
BOLT
HANDLEBAR
SUPPORT
RETAINING
BOLT
HANDLEBAR
KNOB
Red Nozzle - High Pressure Straight Stream
0° angle of spray from center of nozzle
Yellow Nozzle - Medium to High Pressure
15° angle of spray from center of nozzle
Green Nozzle - Medium Pressure
25° angle of spray from center of nozzle
White Nozzle - Low Pressure
40° angle of spray from center of nozzle
Black Nozzle - Low Pressure
Wide broadcast spray for detergent