BACK
FRONT
FRONT
1. Handle Grip
2. Power Brush Tool
3. Front Panel Release Lever
4. Front Panel
5. Filter Cage
6. Headlight
7. Scuff Guard
™
Bumper
8. Brush View Window
9. Carpet Height Adjustment Knob
10. Hose Grip
11. Full Bag Indicator
BACK
12. Upper Cord Wrap with Quick
Cord Release
13. Long Power Cord
14. Hose Wrap/Carry Handle
15. Crevice Tool
(inside extension wand)
16. Extension Wand
17. Lower Cord Wrap
18. Stretch Hose
19. Swivel Casters
™
20. Handle Release Pedal
21. On/Off Pedal
22. Dust Brush
5
FEATURES
1
3
9
10
8
13
14
17
16
15
4
5
6
22
11
12
19
19
20
7
21
18
2
Insert the hose grip into
the side of the cleaner.
Press down firmly to
secure.
NOTE:
A slight
twisting motion may help.
Attach front panel by
aligning 2 tabs on front
panel with 2 slots on body
of cleaner. Secure front
panel by snapping into
place.
6
HOW TO ASSEMBLE
TOOL REQUIRED: PHILLIPS SCREWDRIVER
2.
3.
1.
HOSE ASSEMBLY
Place hose onto hose wrap
(located on back of handle)
to secure.
Secure the handle by
installing the two (2)
screws provided into the
holes on the front of the
unit. Make sure to fully
tighten screws.
Stand unit in upright position
and insert handle into the
hole on the top of the back
panel.
3.
2.
HANDLE ASSEMBLY
Pull release lever on front
panel to remove front panel
from body of cleaner.
Insert carry handle into back
panel opening at the top of
the back panel.
Attach Tools: Place dust brush (A) onto
peg on the tool caddy with bristles facing
out. Slide the extension wand (B)/ crevice
tool (C) (stored inside of extension wand)
through the ring on the back right side of
tool caddy (Diagram 4). Clip Power Brush
Tool (D) into the power brush tool caddy on
the front of the handle (Diagram 4a).
For tidy cord storage,
wrap cord around hooks
on back of cleaner. The
quick cord release turns
for easy access to the
cord.
TOOL STORAGE
CORD STORAGE
C
B
A
D
BACK
FRONT
4.
4.
4a.
5.
1.
