31
3 Vacuum cleaning
GB
3.5 If required: insert the turbo brush
1.
Make sure that the appliance is switched
off and the plug has been disconnected
from the socket.
2.
If necessary, remove any attachments
from the appliance. To do so, unfasten the
release catch (fig. 2/19).
3.
Insert the turbo brush into the vacuum
cleaner opening (fig. 9 + 10) so that you
hear it click into place.
4.
Open up or close the visor depending on
whether you wish to clean in the horizontal
(fig. 9) or vertical direction (fig. 10).
5.
Swivel the brush head, which is pivot-
mounted to rotate approximately 180°,
into the position require when cleaning.
- If necessary, you can lock the brush
head of the turbo brush in position using
the locking button (fig. 1/3).
- If you wish to change the position of the
brush head of the turbo brush again, you
simply have to push the locking button
(fig. 1/3) back up.
6.
You can now switch on the appliance at
the On/Off button (fig. 2/17, position "I").
7.
Make sure that you switch off the appli-
ance (position "O") before you adjust or
remove the turbo brush.
9
10
180°
11
WARNING:
Risk of injury! Before you clean or remove
the turbo brush, switch off the vacuum
cleaner and pull the plug from the socket.
CAUTION:
Risk of material damage! The turbo brush
is not suitable for cleaning sensitive sur-
faces. Comply with the care and cleaning
instructions provided by the manufacturer.
