dirtdevil.com.au
4
Operation
How the robotic sweeper operates
TIP:
For more efficient cleaning and better results, use the robotic sweeper in small enclosed areas. If you have
a larger area to clean try to segment it into smaller areas, moving the robotic sweeper from one area to another.
Closing all entry doors is an easy way to confine a cleaning space. For example: if you have an L-shaped room,
divide the room up into 2 rectangles. Start the robotic sweeper in 1 rectangle and when finished move it to the
2nd rectangle.
NOTE:
The robotic sweeper is intended for bare floor cleaning only. For best results clear the area to be cleaned
of any cords, rugs or mats.
TIP:
Throw rugs and mats rolled up act as great barriers to enclose a desired cleaning area. Best performance
and results come when the robotic sweeper is set up to clean in confined spaces where it cannot wander off.
Random
Edge Following
Circular
This robotic sweeper is equipped with functions suitable for cleaning
HARd FlOOR SURFACES
in the home
only, such as wood, tiles, and linoleum. This robotic sweeper has a three part cleaning routine that continuously
repeats. The routine consists of Random, Circular, and Edge Following.
NOTE:
This process will repeat until it is stopped or batteries run out of power.
NOTE:
This product is intended for use in confined/enclosed spaces.
Continual 3 step cleaning process
NOTE:
The cleaning program consists of 3 steps that occur in order and repeat. They are not selectable, they
have been chosen for optimal effectiveness.
• The robot will start in random mode for 3 minutes then it will go to circular mode until it hits an edge, which
can be a wall, side of a dresser or edge of a stair.
• Then it will start its edge cleaning mode for 3 minutes and repeat starting with random mode again.
