background image

3

 WarninG 

•  Always make sure the filter and  

  dirt container are fitted correctly

  before using your vacuum 

  cleaner.
•  Always turn off and unplug the  

  vacuum cleaner from the charger

  before carrying out any    

  maintenance.
•  Turn off all controls on the 

  vacuum cleaner before    

  disconnecting or connecting the 

  charger.

•  Take extra care when cleaning 

  on the stairs.
•  Always protect the charger cord 

  from heated surfaces or near

  open flames.

•  Use only CE approved 13amp 

  extension cords, non-approved  

  extension cords may overheat.  

  Care should be taken to arrange  

  the extension cord as it can be

  a trip hazard.

•  Always carry the vacuum cleaner  

  by the handle.
•  Store your vacuum cleaner in a  

  cool, dry area.

PLEASE KEEP 

INSTRUCTIONS FOR 

FURTHER USE.

DO'S

DON'TS CONTINUED

•  Don’t use the vacuum cleaner 

  with incorrect voltage as this 

  may result in damage or injury 

  to the user. The correct voltage 

  is listed on the ratings label.

•  Don’t vacuum up hot coals, 

  cigarette butts, matches or  

  smoking hot burning items or  

  use in an area where there may  

  be harmful fluids (chlorine,  

  bleach, and ammonia drain  

  cleaner).

Summary of Contents for DDH01-E01





















Reviews: