28
4 Filters
Checking the protective motor filter
4.2 Checking the
protective motor filter
1.
Switch the appliance off and observe the instructions
under
Z
Chapter 3.2, "Switching off and retracting the
power cable"
.
2.
Remove the housing cover,
Z
Chapter 3.4, "Emptying
the dust container", Point 1
.
3.
Take out the protective motor filter (Fig. 22/1).
4.
Remove any sucked in particles from the filter and from
the grid located behind the filter.
5.
Reinsert the protective motor filter and close the
housing cover.
4.3 Replacing the hygienic
blow-out filter
1.
Switch the appliance off and observe the instructions
under
Z
Chapter 3.2, "Switching off and retracting the
power cable"
.
2.
Open the blow-out filter cover (Fig. 23/1). To do this,
press the lock (Fig. 23/2) down and pull the blow-out
filter cover back.
3.
Pull the filter (Fig. 24/1) out of the back and remove it.
4.
Insert the new filter (Order Number,
Z
Chapter 8,
"Spare parts"
). It will fit without having to click into place.
5.
Then reinsert the blow-out filter cover again.
NOTE:
If the protective motor filter is extremely dirty, rinse it
under running water.
Then leave the filter to dry (approx. 15 hours at room
temperature). Only use it again when it is completely dry.
Fig.22
1
NOTE:
If it is only slightly dirty, it can also suffice to knock the
filter over a dustbin. However, we recommend you
replace the filter regularly.
Fig.23
2
1
Fig.24
1
2
02Centrixx_Retro_gb.book Seite 28 Freitag, 23. Februar 2007 12:27 12
Summary of Contents for Centrixx CPR
Page 1: ...CENTRIXX CPR...
Page 3: ...3 D Abb 1 20 19 4 3 6 9 1 2 5 18 17 8 13 11 12 14 15 10 7 16...
Page 33: ......
