26
4 After use
4
After use
4.1
Emptying the dust con-
tainer
Empty the dust container after each use in order to en-
sure continuous excellent performance.
Empty the dust container at the latest when the dust
container level indicator (Fig. 1/18) lights up or the "Max"
mark (Fig. 16/3) has been reached.
1.
Switch off the appliance,
Z
Chapter 3.2, "Switching off
and retracting the power cable"
.
2.
Press the release button (Fig. 16/1) and lift the dust
container up and out of the vacuum cleaner.
3.
When emptying the dust container, hold it low over a
dustbin.
4.
Push the empty button (Fig. 17/1). The bottom opens
and the dust falls into the dustbin.
5.
Carefully tap out the remaining dust.
6.
Close the bottom. It clicks shut audibly.
7.
Push the dust container back into the cylinder vacuum
cleaner. It clicks shut audibly.
4.2
Overview of the filters
The filters may get dirty with time and therefore must be
checked regularly.
Your cylinder vacuum cleaner is equipped with the follow-
ing filters:
Central lamellae filter (Fig. 18/1)
- see
Z
Chapter 4.3, "Cleaning the central lamellae fil-
ter and the motor protection filter"
Motor protection filter (Fig. 18/2)
- see
Z
Chapter 4.3, "Cleaning the central lamellae fil-
ter and the motor protection filter"
Hygienic exhaust filter (Fig. 18/3)
- see
Z
Chapter 4.4, "Cleaning the hygienic exhaust fil-
ter"
.
ATTENTION:
Before you empty the dust container, switch off the appli-
ance and pull out the mains plug. Otherwise, further
sucked-in dust might destroy the appliance.
NOTE:
The locking mechanism (Fig. 16/2) in the carry handle
prevents inadvertently releasing the dust container when
transporting the appliance. If you remove the dust con-
tainer, the release button must not be depressed.
Fig. 16
MAX
1
2
3
Fig. 17
1
Fig. 18
1
2
3
02_CentrinoXL_gb.book Seite 26 Mittwoch, 16. März 2011 7:07 19