25
2 Unpacking and assembly
GB
2.2
Assembly
1.
Push the end of the suction hose (Fig. 2/1) into the re-
ceiver opening (Fig. 2/2) on the cylinder vacuum clean-
er until the lock clicks into place audibly and noticeably.
2.
Push the handle (Fig. 3/1) into the upper end of the tel-
escopic tube (Fig. 3/2).
3.
Push the floor nozzle (Fig. 3/3) onto the lower end of the
telescopic tube (Fig. 3/4).
4.
Adjust the length of the telescopic tube. To do this,
press the telescopic tube lock (Fig. 4/1) down. Then pull
the telescopic tube by the handle (Fig. 3/1) to the de-
sired length. To lock it, release the telescopic tube lock
when you let go. You will hear an audible click.
5.
Push the accessories mount (Fig. 5/1) onto the handle
(Fig. 5/2). Then push the furniture brush (Fig. 5/3) and
crevice nozzle (Fig. 5/4) on to the holders for these.
Your cylinder vacuum cleaner is now ready to use.
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket. The appliance could be switched on by
accident.
NOTE:
It may be necessary to push a bit harder.
NOTE:
If necessary, you can also attach the accessories mount
to the telescopic tube.
Fig. 2
1
2
Fig. 3
4
1
2
3
Fig. 4
1
Fig. 5
3
2
4
1
02_M7050_gb.book Seite 25 Freitag, 15. April 2011 2:32 14
