Preparatory work
Getting to know the appliance
Fig.
1
:
1
carrying handle;
2
dust compartment
cover release catch;
3
suction hose port;
4
dust
compartment cover;
5
suction power controller;
6
cord rewind button;
7
parking bracket;
8
con-
nection cord;
9
ON/OFF button;
10
exhaust filter
cover;
11
handle;
12
suction hose;
13
bypass vent;
14
hose release;
15
3-in-1 combi nozzle;
16
parquet
nozzle;
17
switchable floor nozzle;
18
telescopic tube
release catch;
19
telescopic tube
Unpacking and assembling
1
Check that the unpackaged contents are com-
plete (Fig.
1
). If you notice any transport damage
or if anything is missing, contact your dealer imme-
diately.
2
Insert the suction hose into the suction
hose port so that it audibly clicks into place (Fig.
2
).
3
Connect the handle with the telescopic tube and
adjust the length of the telescopic tube (Fig.
3
).
4
Connect the telescopic tube and the switchable
floor nozzle (Fig.
4
).
5
Ensure that the bypass vent
(Fig.
1
/
13
) is completely closed.
Connecting the appliance
CAUTION!
If the red marking is visible, retract the connec-
tion cord by pressing the cord rewind button to
pull in the cord up to the yellow mark (Fig.
6
).
Otherwise, the connection cord might be dam-
aged.
1
Pull the connection cord out of the appliance
(Fig.
5
).
2
Insert the plug into a mains socket.
Vacuum cleaning
Flexible vacuum-cleaning
CAUTION!
Especially when vacuum-cleaning stairs make
sure that you always stand on a higher level than
the appliance. Otherwise there is a risk that the
appliance will fall and injure you.
CAUTION!
For hard floors, only use the switchable floor noz-
zle with the brush (Fig.
8
) extended, as the hard
floor may otherwise become damaged.
NOTE:
In normal situations the bypass vent must be
completely closed. With the bypass vent (Fig.
9
)
you can quickly reduce the suction power, e.g.
to release curtains that have accidentally been
sucked in.
To close the bypass vent, push it down. To open
the bypass vent, push it up.
1
Assemble the appliance >”Unpacking and assem-
bling” on page 16.
2
Connect the appliance >”Con-
necting the appliance” on page 17.
3
To switch on
the appliance, press the ON/OFF button (Fig.
7
).
➔
The appliance starts vacuuming.
4
When working
with the appliance, pull it after you like a sleigh.
5
To
switch off the appliance, press the ON/OFF button
again (Fig.
7
).
➔
The appliance switches off.
Regulating the suction power
With the suction power controller (Fig.
10
) you can
adjust the suction power to the surface to be
cleaned:
•
min. position:
for curtains, drapes and the like
•
middle position:
for hard floors without joints and
crevices
•
max. position:
for carpets and hard floors with
joints and crevices
Storing the appliance
NOTE:
In order to park the appliance during the vacu-
uming session, switch off the appliance and insert
the floor or parquet nozzle which is connected
to the telescopic tube into the parking bracket
(Fig.
12
).
1
Switch off the appliance and pull the plug from
the mains socket.
2
Push the cord rewind button
(Fig.
6
), until the connection cord has been fully re-
wound.
3
Insert the floor or parquet nozzle which is
connected to the telescopic tube or handle into the
stowing mount (Fig.
11
).
Maintaining the appliance
Replacing the dust bag
NOTE:
Replace the dust bag, if the indicator „Replace
dust bag“ (Fig.
13
) appears in the window, before
prolonged storage or before shipping.
16
EN
Summary of Contents for 302526
Page 42: ......
