49
C.
Motion
:
(Figure 3-23).
Motion Enable
:
To check it to enable the motion detection function.
Event Interval Time
:
If several events occurred within
Event Interval Time
, all of
the events will be treated as a single event. This default value is 10 seconds and
can be set between 0
~
3600 seconds.
Sensitive
:
This setting defines the sensitivity of the motion detection. This
default value is 80 and the value can be set between 1
~
100. The higher value
means the higher sensitivity.
Add Action Zone
:
Click this button to create a zone for motion detection.
Delete Action Zone
:
Click this button to specify a zone which is disabled for
motion detection.
Select Whole Zone
:
Click this button to set the whole area on the video become
detection zone.
Delete All Zone
:
Click this button to disable all motion detection zones in the
picture.
Motion detection schedule
:
To set when to enable/disable the motion detection
according to weekday/hours or calendar date. (Refer to Figure 3-24)
Note
:
One channel can only have one detection zone; therefore no matter how
many zones are drawn in a channel, they will all be regarded as one
irregular-shaped zone.
Figure 3-23
Summary of Contents for VMS200
