10/100Base-TX Industrial Ethernet Extender
4
y
One Industrial Ethernet Extender is configured as local unit located at
local site of Ethernet extension by setting mode switch at rear panel of
this Industrial Ethernet Extender to Loc (local mode).
y
The other Industrial Ethernet Extender is configured as remote unit
located at remote site of Ethernet extension by setting mode switch at
rear panel of this Industrial Ethernet Extender to Rmt (remote mode).
y
Connect supplied AC to DC power adaptors to receptacle on rear panel
of these two Industrial Ethernet Extenders and then attach plugs into
standard AC outlet sockets to power on these two Industrial Ethernet
Extenders.
y
LED 5 on top panel of these two Industrial Ethernet Extenders might
light on in amber or green color if these two Industrial Ethernet
Extenders are connected in pairs by BNC connectors over a short
coaxial cable (less than 200 meters). This means that these two
Industrial Ethernet Extenders could operate in normal condition since
they finally negotiate a best performance for symmetrical transmission.
