Operating Instruction
18
IP parameter set interface(picture-27)
Network parameter display interface
(picture-28)
7.5.1 RS232 parameter settings
It can change device’s baud rate, but Data/Stop/Parity are used for checking and cannot be set
1
）
Baud: device’s baud rate provide 6 choices, 115200, 57600, 38400, 19200, 9600, 4800. The device
is 115200 by default.
2
）
Data/Stop/Parity: is used only for
view
and cannot be changed, Unless use the highest account.
3
）
The underscore show that this parameter cannot be set.
Operation instructions:
①
Select“Config”, Press“ENTER”
②
Press “UP” “DOWN” button to select“RS-232”, Press“ENTER”
③
Press “UP” “DOWN” button to select“Baud”, Press“ENTER”
④
Press “UP” “DOWN” button to select Baud rate you need, Press“ENTER, Baud rate set done.
