27
CHANGING VOLUME LOCK
The DIRECTV® Universal Remote Control is set to control
volume of a device through your TV while in the TV,VCR,
or SAT mode. However, in the AUX mode, you still have
separate control of of your auxilary device’s volume.
If your TV is not remote controllable, or if you would like
the volume to be controlled by a different device, you can
change the Volume Lock setting to control a volume
through a non-associated mode (e.g., through the
VCR
in
the TV mode).
To Change Volume Lock To The VCR Mode:
1.
On the DIRECTV Universal Remote Control,
press
VCR
once. Then press and hold
Setup
until the
VCR
key blinks twice, then release
Setup
.
2.
Enter
9
-
9
-
3
.
3.
Press
VCR
once. It will blink twice.
4.
Now, whenever you press
Volume
or
Mute
,
volume will be controlled by your VCR.
To Change Volume Lock To The SAT Mode
(Selected Models Only) :
1.
On the DIRECTV Universal Remote Control,
press
SAT
once. Then press and hold
Setup
until the
SAT
key blinks twice, then
release
Setup
.
2.
Enter
9
-
9
-
3
.
3.
Press
SAT
once. It will blink twice.
4.
Now, whenever you press
Volume
or
Mute
,
volume will be controlled by your satellite
receiver.
To Change Volume Lock To The AUX Mode:
NOTE: Performing these steps will allow you to access the volume
control of your auxilary device in all modes.
1.
On the DIRECTV Universal Remote Control,
press
AUX
once. Then press and hold
Setup
until the
AUX
key blinks twice, then release
Setup
.
continued on next page...
DirecTV Mnl MDTV6 3/21/03 2:04 PM Page 27
Summary of Contents for Universal Remote Control
Page 1: ...DIRECTV Universal Remote Control User s Guide ...
Page 32: ......