DirecTV HR22, User Manual

Page: 133 / 148

133
Appendix 3: About High-Definition
1st press: 480i/Stretch
2nd press: 480i/Letter box
3rd press: 480i/Crop
4th press: 480p/Stretch
5th press: 480p/Letter box
6th press: 480p/Crop
7th press: 1080i/Stretch
8th press: 1080i/Letter box
9th press: 1080i/Crop
10th press: repeat cycle
If your TV supports all formats (1080i, 720p, 480i and 480p), then your cycle would also include 720p. If Native is turned on, the FORMAT
key cycles through Stretch, Letter and Crop for the current TV program’s native resolution. The FORMAT key allows you to easily cycle
all resolution and format settings with a single key until the picture displays the way you like it. Navigating menus to modify settings is
not necessary.
If pressing this key causes a loss of video and audio, continue to press it until the picture returns. (Wait a second between presses
to allow the Receiver to change the resolution.) This can happen if your settings include a resolution that your TV doesn’t support. To
correct this, you’ll need to change your resolution setting: Press MENU, select Parental, Fav’s & Settings, then System Setup, then
HDTV in the left side menu. Press SELECT on the Resolution tab and mark or unmark the TV Resolutions to display the resolutions
supported by your television.
Note:
* In Native mode, the receiver automatically adjusts resolutions to match the resolution
of individual TV programs as they are tuned.
Resolution (RES) Key on Receiver Front Panel
This key is used to through cycle all available resolutions on your DIRECTV Plus
®
HD DVR. It does not through cycle format settings. If
video and audio are not appearing, it may be because the current resolution setting is not supported by your television. By pressing this
key, you can check all available resolutions to see if that solves the problem. The lights next to the RES key on the front panel will light
below the resolution to which the receiver is set; they will change with each key press.