3 |
P a g e
18 pin Radio T-Harness connector
1
+12v Power
10
Ground
2 Audio Ground OUT
Radio 11
Audio Ground IN
Car
3
Audio Right OUT
Radio 12
Audio Right IN
Car
4
Audio Le
ft
OUT
Radio 13
Audio Le
ft
IN
Car
5
1A 12v OUTPUT
OUT 1 14
1A 12v OUTPUT
OUT 2
6 Infotainment CAN HI Radio 15 Infotainment CAN LO Radio
7 Infotainment CAN HI Screen 16 Infotainment CAN LO Screen
8
Vehicle CAN HI
Car
17
Vehicle CAN LO
Car
9
Vehicle CAN HI
Radio 18
Vehicle CAN LO
Radio
UCI Installation
T
OOLS REQUIRED
Phillips head screwdriver
P
lasti
c pry tool
Small pocket screwdriver
*Refer to online document for vehicle specific installation*
1.
Gain access to the back of the radio head. Pull out the radio enough to
access the wiring behind the radio.
2.
Disconnect the white 22 pin connector from behind the radio/gateway.
3.
In the kit is a 22 pin T-harness, connect the removed harness from the
radio to the female receptacle of the supplied harness. Take care not to
bend any of the pins in the female receptacle when ins
ertin
g.
4.
Plug the male plug of the T-harness into the radio where the factory
connector was located.
