manualshive.com logo in svg

DirectOut Technologies PRODIGY.MP, User Manual

Share
Download
DirectOut Technologies PRODIGY.MP User Manual Download Page 43

page 43 of 130

Prodigy.MP Manual - Version 2.0

 

Do not connect voltage sources to the analog outputs. This may cause damage at 
the output stages. Observe the technical specifications listed in this document.

The line output is not servo balanced. Do not connect the negative lead to ground. 
This may cause damage at the output stage. Observe the technical specifications 
listed in this document.

The pinout of the digital and analog I/O is different. Check for appropriate cabling to 
ensure proper operation and to avoid damages caused by improper connections.

Level Settings

WARNING

To prevent damage from the board only set the jumpers parallel in horizontal 
direction - as illustrated above.

NOTE

The analog outputs are fed by the D/A converters and not a split-out of the analog 
inputs.

WARNING

WARNING

OK

NO!

NO!

15 dBu

18 dBu

24 dBu

Summary of Contents for PRODIGY.MP



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands