DirectOut Technologies PRODIGY.MP, User Manual

Page: 106 / 130

page 106 of 130 Prodigy.MP Manual - Version 2.0
CHAPTER 7: DANTE.IO
CHAPTER 7: DANTE.IO
Introduction
DANTE.IO is an audio network module for Dante / AES67.
All functions of the device are managed via the Dante Controller application.
To control the functions of the host device connect your computer with the
management network port (MGMT) and use the globcon application.
Dante Controller
To control a Dante network the application 'Dante Controller' needs to run on a
computer that is connected to the audio network.
The software is available from the Audinate website (requires a free registration):
https://www.audinate.com/products/software/dante-controller
A detailed documentation about using Dante Controller is available here:
https://dev.audinate.com/GA/dante-controller/userguide/webhelp/
At startup Dante Controller scans the network for connected Dante devices a
shows them automatically in the 'Network View'.
The IP address of a Dante device must fit into the network environment for proper
operation of a Layer 3 based network. However Dante Controller will mark a device
entry red if the IP Address is not matching the network environment and helps
resolving the issue.