manualshive.com logo in svg

DirectOut Technologies D.O.TEC M.1k2, Hardware Manual

Share
Download
DirectOut Technologies D.O.TEC M.1k2 Hardware Manual Download Page 36

page 36 of 44

M.1k2 Hardware Guide - Version 1.3

Appendix F - USB Serial Driver Installation

 Appendix F - USB Serial Driver Installation

This instruction describes the procedure of installing the USB serial driver on 
Windows®.

Requirements

•  M.1K2
•  USB cable (Type B)
•  Windows® PC (supported operating systems: XP, Vista,7, 8, 10)
•  USB serial driver from M.1K2 product page at 

www.directout.eu

Driver details

This driver (m1k2-black-usb.inf) provides access to the virtual COM port. The driver 
works with the M.1K2 - black panel version only.

Installation

1.

  Unpack the driver fi les into a temp directory.

2.

 Connect the USB port of M.1K2 to an USB port of your computer.

3.

 Switch the device on.

When connecting the device Windows will try to download driver fi les from the 
Windows Update server. As the DirectOut drivers are not distributed through the 
Microsoft Update Service this attempt will fail.

4.

 Open the ‘Device Manager’. It will show an unknown device called ‘M.1K2’.

Summary of Contents for D.O.TEC M.1k2













































Reviews:

No comments

Brands by name

Popular brands

Load more brands