manualshive.com logo in svg

DirectOut Technologies D.O.TEC M.1k2, Hardware Manual

Share
Download
DirectOut Technologies D.O.TEC M.1k2 Hardware Manual Download Page 11

page 11 of 44

M.1k2 Hardware Guide - Version 1.3

CHAPTER 2: Legal issues & facts

Conformity & Certificates

CE

 

This device complies with the basic requests of applicable EU guidelines. The 
appropriate procedure for approval has been carried out. 

RoHS 

(Restriction of the use of certain Hazardous Substances) 
This device was constructed fulfilling the directive on the restriction of the use of 
certain hazardous substances in electrical and electronic equipment 2002/95/EC. 

WEEE 

(Directive on Waste Electrical and Electronic Equipment) 
Due to the directive 2002/96/EC for waste disposal this device must be recycled. 
For correct recycling please dispatch the device to: 
DirectOut GmbH, 
Leipziger Str. 32
09648 Mittweida 
Germany 
Only stamped parcels will be accepted! 
WEEE-Reg.-No. DE 64879540 

Contact

DirectOut GmbH, Leipziger Str. 32, 09648 Mittweida, Germany 
Phone: +49 (0)3727 5665-100  //  Fax: +49 (0)3727 5665-101

www.directout.eu 

Summary of Contents for D.O.TEC M.1k2













































Reviews:

No comments

Brands by name

Popular brands

Load more brands