page 15 of 44
D.O.TEC
®
ANDIAMO 2.AD Hardware Guide - Version 1.0
DirectOut Technologies
®
CHAPTER 3: Installation
© 2013 DirectOut GmbH
warning
This device
Must
be connected to the mains using the three-cord
power leads supplied with the system. Only supply the voltages and
signals indicated (84 V – 264 V).
This device may operate with only one power supply. To provide
power supply redundancy, it is recommended to connect both PSU 1
and PSU 2 to independent power supplies with separate fuses.
5.
Connect the signal cables
1
for the analog audio signals to
the DSUB-25 connectors (TASCAM pinout -
see page 39
).
1
signal cables are not included in delivery
7.
Using the power cords provided connect both PSUs to a
matching power supply:
6.
Optional: Connect an USB cable to the USB port for remote
control or fi rmware updates. This requires the D.O.TEC® USB
driver (Windows) being installed fi rst. The driver and the instal-
lation instructions are available at
www.directout.eu
.
Link:
http://www.directout.eu/en/support/downloads/andiamo_2_ad.html
