© 2008 Directed Electronics. All rights reserved.
10
~FWT]cP__X]VX]c^P]TgXbcX]VT[TRcaXRP[RXaRdXcU^a !
volt power, consult the vehicle’s owner’s manual and
verify that the electrical circuit can provide the addi-
tional power required for the FM-SC1 system (See the
Specifications section in this manual for the power
requirements of the FM-SC1 system). Do not replace the
fuse of the electrical circuit with a larger fuse in order to
accommodate the FM-SC1 system. Doing so could result
in a circuit overload, which could cause an electrical fire.
Power Harness Color Codes
Red
Acc12V
Yellow
B12V
Black
Ground (Chassis)
Blue
Remote out +12V
Display Control Unit Installation
Notes
~ <^d]ccWT3Xb_[Ph2^]ca^[D]XcWTaTPUcTa32DX]P[^RP
-
tion which is convenient to the driver, but which does not
obstruct the operation of the vehicle, or pose a risk of
injury to the occupants in the event of a sudden stop or
accident.
~ 3^]^c\^d]ccWT32DfWTaTXcf^d[SWX]STa^a^QbcadRc
the operation of the vehicle’s air bags.
~ 3^]^c\^d]ccWT32DfWTaTXcfX[[QTX]SXaTRcbd][XVWc
for prolonged periods of time, or where the vehicle’s
heating/cooling vents would blow directly on the DCU.
~ CWT32D\PhQT\^d]cTSdbX]VcWTX]R[dSTSET[Ra^
strips to adhere the unit to the vehicle’s interior surface,
or mounted using a mobile phone type mounting system
by using the included mobile phone mounting clip which
attaches to the DCU.
