8
© 2018 Directed. All rights reserved.
Enter Valet Mode
Turn
the ignition ON and then OFF 2 times, and
press
and
hold
A U
X
and
A U
X
within 5 seconds. The siren will chirp once, and the system
will enter valet mode. In valet mode, the LED will stay on solid for
1 hour, and then will shut off to reduce current draw. In valet mode
if you press the
A U
X
button, the siren will chirp 3 times. Once the
1-hour solid LED cycle ends, the LED will also flash 3 times when
the
A U
X
button is pressed.
Note
: Use the same method to exit valet mode.
Memory Function
This security system will store its current status to non-volatile mem-
ory. If power is lost then reconnected, the system will recall the
stored status from memory. This means if the unit is in valet mode
and the battery is disconnected for any reason, such as servicing
the motorcycle, when the battery is reconnected the unit will still be
in valet mode. This applies to all statuses of the system including
disarm, and valet mode. If the system is armed and the battery is
reconnected, the system will trigger.
Feature Settings
1. With system disarmed,
turn
the ignition to ON, and
press
and
hold
A U
X
and
A U
X
. Within 5 seconds siren will chirp once,
LED will flash once per second to indicate system entered
feature settings.
2.
Press
A U
X
once, siren will chirp once to indicate unit entered
feature number 1.
Press
A U
X
twice, siren will chirp twice to
indicate unit entered feature number 2.
Press
A U
X
three times,
and siren will chirp three times to indicate unit entered feature
number 3.
