Directed FORD9 Manual Download Page 21

Directed Digital System FORD9

© 2016 Directed. All rights reserved.

Pit stop mode

1

Stop the vehicle in a safe parking spot and put the 

gear in 

Park

 (P).

Put 

gear in 

Park

2

Press the 

Remote Start

 button on the transmitter.*

The parking lights will flash once to indicate the 

vehicle is now in 

Pit Stop Mode

.

Parking lights flash x1

Press Remote 

Start button*

&

3

It is safe to leave the engine running and exit the 

vehicle with the factory remote in hand.

Note

: We recommend that you always lock the doors 

of your vehicle when leaving it unattended.

Remove batter

from one 

key fob

Insert a FOB 

Key

(without batter

y)

other key fob

more than 

10 feet away

Press UNLOCK

(door button)

+

Key port

2

X

2

X

2

X

Exit vehicle 

with remote

* Your aftermarket remote may differ from the model shown in the illustrations.

List of available commands

Note that the information below is for Viper, Clifford and Python models. Icons and 

commands may differ depending on the remote brand and model purchased. Refer 

to your authorized installation center for more information.

Button(s)

Actions

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

Press & hold for 5 seconds to activate the trunk release (optional).

* This output is configurable. see your authorized installation center for more information.

SmartStart compatible

This system is compatible with Directed SmartStart 3.0. For a complete list of 

supported features, please visit www.mysmartstart.com.

What is SmartStart?

Now you can remote start, lock and unlock your car just by pushing a button on your 

smartphone; using the SmartStart App from Directed, the leader in vehicle security 

and remote start. The simple graphical interface gives you control over the following 

features of your installed remote start or security with remote start system: 

•  Lock/Arm

•  Unlock/Disarm

•  Remote Car Starter

•  Trunk Release

•  Panic

•  Aux Channels

You can also control multiple vehicles – great for families – and assign more than 

one user to control a vehicle. It's easy with SmartStart! But, this is only the beginning! 

SmartStart is loaded with additional features including GPS tracking, SmartSchedule, 

vehicle status, roadside assistance, home control, parked car finder and more.

3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new 

level of 2-way interaction with your vehicle. Connectivity is managed through the 

Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.

For more information, visit www.mysmartstart.com.

Summary of Contents for FORD9
























Reviews: