4
Directed Digital Solutions HYUNDAI8
© 2016-12-02 Directed. All rights reserved.
Introduction
The HYUNDAI8 firmware for Directed Digital Solutions is a complete solution for remote start, security (if
applicable), bypass interface, and convenience needs compatible with specific Hyundai vehicles.
Warning!
This module can only be programmed via the web tool, which can be found on
www.directechs.com or using the Directechs Mobile application for smartphones. Features and functions will
become accessible when you connect the module using the XKLoader.
Pre-installation and application warnings
Firmware notes:
This section highlights important information for this specific firmware and will assist in
pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
Keys required for
programming
1
Keys required for
operation
0
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic
connector.All connectors are displayed from the wire side (unless specified otherwise).
Refer to the "Vehicle wiring reference chart" following each installation type.
General notes:
This section highlights important information for this specific firmware.
[1]
The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin.
[2]
The siren is only compatible with hybrid systems.
[3]
Connection is required for vehicle takeover.
Additional parts required (maximum required):
Diode 6A
0 x 1A Diodes
86
85
30
87a
87
0 x Relay
Resistor 100
Ω
0 x Resistor
Fuse 7.5A
0 x Fuse
