13
Directed Digital Solutions HYUNDAI8
© 2016-12-02 Directed. All rights reserved.
Type 3
Refer to "Pre-installation and application warnings" on page 4 and "Vehicle wiring reference chart" on page 14 for important information on this installation.
Hood Pin
(+) Starter Output : White/Red: 12
(+) Siren Output: Brown: 17
HS CAN Low: Tan: 4
HS CAN High: Tan/Black: 5
EMS COM Data: Orange/Black: 3
Siren
(-) Hood Input: Gray: 3
All connectors are displayed from the wire side (unless specified otherwise).
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
16
8
9
1
Diagnostic Connector OBDII (connector side view)
EM-11 connector
(gray and black 82-pin connector)
B-CAN Low: Brown, pin 18
(+) Ignition 1:
Pink, pin 1
FT CAN High: Orange/Green: 7
FT CAN Low: Orange/Brown: 8
2&8: White/Brown: (+) Ignition 2 input
10: Red: (+) 12V
6: Yellow: (+) Ignition 1 Output
5: Orange/Red: Smart Key Interrupt (conn. side)
4: Yellow/Red: Smart Key. Interrupt (veh. side)
12: Brown: (+) Ignition 2 Input
9: Black: (-) Ground
1&7: White: (+) Ignition 2 Output
(+) Starter:
Yellow, pin 11
Smart Key
Interrupt:
Brown,
pin 7
B-CAN High: White, pin 17
I/P-C Front of Smart Junction Box
(White 4-pin connector)
(+) 12 V: Red, pin 2
C-CAN Low: Yellow, pin 14
C-CAN High: White, pin 6
EMS COM Data:
Brown/Orange,
pin 29
(+) Ignition 2:
Green, pin 28
I/P-F Back of Fusebox
(white 32-pin connector)
1
2
3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18
19 20 21 22 23 24 25 26 27 28 29 30 31 32
Cut
1
2
3 4
I/P-E Rear of fuse Box
(gray and black 38-pin connector)
11
10
19
27
37
9 18
8
7
17
6 15
25 34
5 14
24 33
4
3
2
12
20
29
28
1
13
23 33
22 31
21 30
16
26 35
36
