Rev.: 20
914
170
Platform: DBALL2
Firmware TL7
:
© 2017 Directed. All rights reserved.
Feature and Option List
It is recommended to configure all
features and options listed below
the
the
using
configuration tool found on the module
flashing page on www.directechs.com. The web offers more options; however, manual configuration of the features is possible
using the information on this page.
Feat.
Operation
Flashes/Option
Description
1. Disabled*
Module is connected to a remote starter using a standard installation.
2. RFTD Output
Module is connected to an XL202 using an RSR or RXT installation (when available).
3. SmartStart
Module is connected to SmartStart using an RSR or RXT installation (when available).
1. Driver Priority*
Unlocks only the driver door on first press and unlocks all doors on a second press within 5 seconds.
2. All
Unlocks all doors on first press.
1. Trunk
Trunk: Will pop the trunk if available.
2. Right Sliding Door*
When available, will operate the right sliding door.
3. Left Sliding Door
When available, will operate the left sliding door.
1. Trunk
Trunk: Will pop the trunk if available.
2. Right Sliding Door
When available, will operate the right sliding door.
3. Left Sliding Door*
When available, will operate the left sliding door.
1. Disabled
The OEM alarm will not be controlled by DBALL upon remote start. No disarm or arm command will be
executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.
2. Safelock
Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at
the beginning of the sequence, and relock after start and shutdown.
3. Enabled*
Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and rearm the
vehicle in the remote start sequence, only when required. The reason for this is, factory alarm control
must often be done by lock or unlock operation. This could create unnecessary actions on door lock
modules, such as the horn to honk. When possible, Smart OEM Alarm Control will monitor the alarm and
door lock status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped
with factory alarm, the disarm/rearm will not be executed. Smart OEM Alarm Control will also monitor the
remote starter actions so that the factory alarm control is not done twice. A remote starter, for which the
Safelock feature is active, will work perfectly with this option and will make it invisible to the user.
1. Not Equipped*
The vehicle is not equipped with an automatc trunk/hatch opening system.
2. Equipped
The vehicle is equipped with an automatc trunk/hatch opening system.
Motorized Hatch Equipped
AUX 2
6
RF Output Type
1
Unlock Driver Priority
(works only with types 1 & 3)
3
2
AUX 1
* Default Option
Smart OEM Alarm Control
5
4
Page 4
2