20
403.CHRYSLER6 2.17 2014 Dodge/Ram 3500
©2022 VOXX•DEI LLC. All rights reserved.
Quick Reference Guide (customer copy)
List of available commands
Note that the information below is for many Viper
®
, Clifford
®
, Python
®
, Avital
®
, Automate
®
,
Autostart
®
and AstroStart
®
models. Icons and commands may differ depending on the
model and options purchased. Refer to your authorized installation center for more specific
information.
Button(s)
Actions
Press
&
hold
for 1 second to lock.
Press
&
hold
for 1 second to unlock.
*
Press
&
hold
for 1 second to remote start.
*
Press
&
hold
for 5 seconds to activate the trunk release (optional).
* Icon and remote appearance may differ depending on the model purchased.
SmartStart compatible
This system is compatible with Directed SmartStart. For a complete list of supported features,
please visit www.mysmartstart.com.
What is SmartStart?
Now you can remote start, lock and unlock your car just by pushing a button on your
mobile device; using the SmartStart App from Directed, the leader in vehicle security and
remote start. The simple graphical interface gives you control over the following features of
your installed remote start or security with remote start system:
Lock/Arm
Unlock/Disarm
Remote Car Starter
Trunk Release
Panic
AUX Channels
You can also control multiple vehicles – great for families – and assign more than
one user to control a vehicle. It’s easy with Directed SmartStart
®
! But, this is only the
beginning! Directed SmartStart
®
is loaded with additional features including GPS tracking,
SmartSchedule, vehicle status, roadside assistance, parked car finder and more.
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there
are 3 possible ways you can send commands to your vehicle, using the:
1. Factory remote.
2. Aftermarket remote.
3. Directed SmartStart
®
application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3 times
quickly on your factory remote.
Range Extender Ready (RXT)
Range Extender Ready (RXT) is used to amplify the distance covered by
factory remote starters. The interface connects to the vehicle and uses
the same code as the factory remote to remote start the vehicle. The
runtime and features are identical to the OEM remote starter. Some of the
advantages of RXT are greater remote range and 2-way compatibility.
RXT Operations
The following table describes the behavior of the vehicle in relation to the RXT feature. The
following commands are performed on the aftermarket remote.
Command
Engine
Result
Start
NOT running.
The engine will be started.
Start
Running.
The engine will be stopped.
Runtime
The runtime is equivalent to the amount set for the OEM remote starter, which can be
modified in some vehicles (refer to your vehicle owner’s manual for more information). A
maximum of 2 remote starts can be performed between ignition cycles.
Runtime Reset
The Runtime Reset feature allows the user to return the runtime to its predefined value. This
can only performed ONCE per remote start.