14
403.CHRYSLER6 2.17 2014 Dodge/Ram 3500
©2022 VOXX•DEI LLC. All rights reserved.
Active Ground When Running (Status)
LED
Description
Troubleshooting
Flashes green
Ground When Running (Status) command
received.
The module has initialized the remote start sequence.
Flashes red & orange
Ignition ON command received.
The module has received the Ignition ON command and is processing the remote start sequence.
Flashes green quickly
Start ON command received.
The module has received the Start ON command and is processing the remote start sequence.
Flashes red x 10
PTS shutdown error.
The PTS output from the module was not activated due to safety protection.
Flashes red x 21
CAN bus incorrectly detected.
Commands
LED
Description
Troubleshooting
Flashes orange x 1
LOCK command received.
If the bypass module fails to flash, it did not receive the signal. Commands can come from RF or D2D.
Flashes orange x 2
UNLOCK command received.
If the bypass module fails to flash, it did not receive the signal. Commands can come from RF or D2D.
Flashes orange x 3
TRUNK command received.
If the bypass module fails to flash, it did not receive the signal. Commands can come from RF or D2D.
Flashes orange x 4
AUX1 command received.
If the bypass module fails to flash, it did not receive the signal. Commands can come from RF or D2D.
Flashes orange x 5
AUX2 command received.
If the bypass module fails to flash, it did not receive the signal. Commands can come from RF or D2D.
Flashes orange x 6
AUX3 command received.
If the bypass module fails to flash, it did not receive the signal. Commands can come from RF or D2D.
Shutdown Codes
LED
Description
Troubleshooting
Flashes green x 1
Takeover successful.
Normal operation.
Flashes red x 1
Runsafe was not disabled.
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in
takeover mode.
Flashes red x 2
Brake was not detected.
The brakes were not detected, which prevents the system from shutting down the vehicle.
Flashes red x 3
Smart key was not detected.
The smart key was not detected, which prevents the system from shutting down the vehicle.
Flashes red x 4
Speed was detected.
The vehicle was detected as moving, which prevents the system from shutting it down.
RXT Error Codes
LED
Description
Troubleshooting
Flashes green x 7
Start command received.
If the module fails to flash, it did not receive the signal.
Flashes green x 8
Stop command received.
If the module fails to flash, it did not receive the signal.
Flashes red x 5
Start fail.
The RXT start/stop message was received by the module, but not executed on the vehicle.
Flashes red x 6
Stop fail.
The RXT start/stop message was received by the module, but not executed on the vehicle.
Flashes red x 7
RFTD disabled.
OEM Remote Start Activation was attempted while the RFTD feature is disabled. Make sure RXT is
selected from the web in the flashing process.
Flashes red x 8
OEM RS disabled.
The factory remote start option is disabled. Refer to the vehicle’s owner manual to reactivate the factory
remote starter.