© Directed Electronics, all rights reserved .
10
Installation
Directed Electronics recommends that you have this prod-
uct professionally installed. It is recommended that prior to
starting the installation, you thoroughly read this manual
and follow the guidelines listed below:
Some installations may use the factory satellite radio
tuner location. If you are using this location, please follow
the factory instructions for installing the TOY-SC1 in your
vehicle. If you are not using this location, please read the
following installation guidelines.
Consider the mounting location carefully. You should make
sure that you avoid the following:
• Any location where the unit is exposed to moisture.
• Any location where the unit is exposed to extreme heat.
• Any location that would interfere with moving parts on
the vehicle or hamper driving.
Mounting the TOY-SC1 Interface: Be sure that you find a
location that is flat and has clearance above the unit to
prevent any damage as well as allow for ventilation.
Do not install the TOY-SC1 under the carpet or in a small
enclosed area without proper ventilation. Doing so can
result in damage to the tuner or the vehicle.
Use the supplied screws to securely fasten the unit.
Note: Please refer to the SIRIUS SCC1 or SCVDOC1
manuals for additional installation instructions needed to
complete the system
