15
© 2 0 0 8 d i r e c t e d e l e c t r o n i c s
Illumination On/Off
Press
to select LCD backlight illumination On/Off. The
LCD backlight will illuminate when a remote button is pressed,
or an alarm status page is received.
Page notification
The remote control can be programmed to notify the user of a
page (audibly beeping if the vehicle’s status changes, e.g. door
unlocked, engine started, vehicle violation, etc.). On the LCD
remote press
to select page On/Off. One beep is page On,
Two beeps is page Off. When programmed off the remote will not
give any notification that a page was received from the vehicle.
N
Noottee:: If programmed Off, n
noo aallaarrm
mss will be notified to the
remote. Command information (armed/disarmed) will be noti-
fied to the remote.
To exit programming mode
The LCD remote control will exit programming mode after 5-
seconds of inactivity and will emit 2 long beep.
➜
➜
LLC
CD
D B
Baacckklliigghhtt sseettttiinnggss PPrrooggrraam
mm
miinngg rreessppoonnssee
ON
1-beep, backlight ON
OFF
2-beeps, backlight OFF
➜
