10
© 2009 Directed Electronics. All rights reserved.
Remote Pairing
Prepare the vehicle system to be Paired with a new remote
Open
1.
a door.
Turn
2.
the key to the ON position.
Within 5 seconds
3.
press
and
release
the Control button on the Control Center one time.
Within 5 seconds,
4.
press
and
hold
the Control button on the Control Center. The status LED will flash one
time and the siren then chirps to confirm the vehicle is ready for remote pairing.
Release
5.
the Control button and proceed below.
Note:
If no remote pairing results, the system will exit after 60 seconds.
Prepare the 1-way remote control to be Paired with the system:
Make sure the remote is set for the desired Car 1 (Default) or Car 2 operation for the system it will be paired
with.
Press and hold the
1.
AUX
button for 8 seconds.
Note: If Car 2 mode is on, ignore the Car Select LED flash after 3 seconds.
Wait for the Transmit LED to light solid. Release the
2.
AUX
button.
Press the
3.
AUX
button for 1 second. The transmit LED will blink 3 times.
Within 5 seconds, press the
4.
AUX
button.
The vehicle siren will chirp. You have now successfully learned the remote to the vehicle remote start and
5.
security system.
Press the
6.
AUX
button two times to exit learn routine on the remote. The transmit LED will turn off when exit-
ing.
