Directed Electronics PYTHON 480XP, Installation Manual

Page: 12 / 36

12
© 2002
Directed Electronics, Inc.
H2/2 LIGHT GREEN/BLACK (-) Auxiliary Output
This wire sends a negative pulse every time the remote start is activated. This can be used to pulse
the disarm wire of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to the
disarm wire as shown in the diagrams below. This wire can also be used as a special accessory output.
(See
Feature Descriptions section of this guide.)
R Reellaayy ffoorr N Neeggaattiivvee ((-)) D Diissaarrm m W Wiirree R Reellaayy ffoorr PPoossiittiivvee ((++)) D Diissaarrm m W Wiirree
Relay Satellite Key Switch Interface
Wire Connection Guide
Heavy Gauge Relay Satellite Wiring Diagram
All except the red heavy gauge wires leading from the relay satellite are used to energize high current
circuits in the vehicle. It is crucial that these connections are made correctly so that they are capable
of handling the current demands. For this reason, scotch locks, T-taps and other such connectors
should not be used.
___
___
___
___
___
___
PINK/WHITE (+) Output to Second Ignition Circuit
PURPLE (+) Output to Starter Circuit
ORANGE (+) Output to Accessory Circuit
PINK (+) Output to Ignition Circuit
RED (+) High Current 12V Input
RED (+) High Current 12V Input
1
2
3
4
5
6