Directed Electronics ProSecurity SR6000, Installation Manual

Page: 18 / 57

1 18 8
This input comes from the factory set to 2 activation pulses. This means that it is necessary to have 2 consecu-
tive ground pulses on the white/blue wire for the remote start to activate or to deactivate. The same holds true
for the remote control activation when set to a two pulse setting it is necessary to press the button twice
for the remote start to activate or deactivate.
N NO OTTEE:: When the activation pulse count can be programmed to 1, 2, or 3 pulses when changed it
will affect both activation inputs; the White/Blue wire and the remote control activation.
Connect this wire to the optional domelight supervision relay as shown below:
IIM MP PO OR RTTA AN NTT!! This output is only intended to drive a relay. It cannot be connected directly to the
domelight circuit, as the output cannot support the current draw of one or more light bulbs.
H H1 1//4 4 B BLLA ACCK K//W WH HIITTEE ((--)) 2 20 00 0 m mA A d do om meelliig gh htt ssu up peerrvviissiio on n o ou uttp pu utt
H H1 1//3 3 W WH HIITTEE//B BLLU UEE rreem mo ottee ssttaarrtt ((--)) aaccttiivvaattiio on n iin np pu utt