13
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
auxiliary channel bypass
Alarm sensor input zones one, two, three, and eight will be bypassed
while a pulsed or timed auxiliary Output is active.
disarm/valet mode
Entering your pin code using the PlainView 2 Valet switch allows you
to disarm the system or enter valet mode without using the transmit-
ter. In valet mode, the security system will not arm, even with the trans-
mitter, but all convenience functions (door locks, boot release, etc.) will
continue to work normally.
To disarm or enter Valet Mode:
1. Turn the ignition on.
2. Enter PIN code (the factory setting is written on
the back of this manual). Your pin code has 4
digits. To enter a digit, you press and release
the
button of the plainview 2 switch the
number of times of the digit to be entered, fol-
lowed by pressing the unmarked
button. To
enter a zero, you simple press and release the
unmarked button.
EXAMPLE:
To enter a code of 1203, you would press and release the
plainview switch as follows:
–
,
– –
, ,
– – –
