11
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
disarming without a transmitter
This feature allows you to disarm the system without the transmitter
should it be lost, damaged, or disabled. In order to disarm without a
transmitter, you must have the vehicle’s ignition key, know where the
PlainView 2 Valet switch is located, and have the PIN code. Be sure to
check with the installer for the location of the PlainView 2 Valet switch.
Please refer to the
Disarm/Valet Mode
section of this guide for instruc-
tions to enter the pin code.
remote siren silencing
This system offers remote siren silencing. Remote siren silencing is a fea-
ture that makes it possible to silence and reset the system when it is
triggering without disarming the system. If the system is triggered and
the siren has been sounding, press
on the transmitter to stop the
trigger and return the unit to the armed state. The system will not dis-
arm, but rather reset. This prevents you from disabling the system
should you wish to silence it without visually checking the vehicle. After
resetting the system, press
again to disarm the system.
transmitter chirp muting
To arm or disarm your system without siren chirps, simply press
on the transmitter, and the confirmation chirp(s) will be eliminated for
that one operation only. The indicator lights will flash to confirm the
arm/disarm command. If you want the arm/disarm chirps turned off
permanently, please refer to the
User-Selectable Features
section of this
guide.
