background image

14

© 2011 Directed Electronics. All rights reserved.

Menu 2 - Convenience

Menu 

Item 

Feature

Opt. 1

Opt. 2

Opt. 3

Opt.4

Opt. 5+

1

One-time Bypass

One time 

bypass Off

One time 

bypass On

2

Nuisance Prevention

On

Off

3

Override Pulse count

1

2

3

4

5

4

Door Trigger Error Chirp 

On

Off

5

Ign-controlled Dome light

On

Off

6

OEM Alarm Disarm w/Aux-

Trunk

On

Off

7

OEM Alarm Disarm Output

With Unlock

Before Unlock

Remote Start 

Only

8

OEM Alarm Disarm Pulses

1

2

9

Aux 1 Output type

Validity

Latch

Latch/reset/ign 30 sec. Timed

Off (5)/2nd

unlock (6)

10

Aux 1 Linking

No Linking

Link to Arm

Link to Disarm

Link to Arm/

disarm

Link to Remote 

Start only

11

Aux 2 Output Type 

Validity

Latch

Latch reset/ign

30 sec. Timed

Off (5)/2nd

unlock (6)

12

Aux 2 Linking

No Linking

Link to Arm

Link to Disarm

Link to Arm/

Disarm

Link to Remote 

Start only

13

Aux 3 Output Type 

Validity

Latch

Latch reset/ign

30 sec. Timed

Off (5)/2nd

unlock (6)

14

Aux 3 Linking

No Linking

Link to Arm

Link to Disarm

Link to Arm/

Disarm

Smart Key 

Control (Link to 

Remote Start 

Off)

15

Aux 4 Output Type

Validity

Latch

Latch reset/ign

30 sec. Timed

Off (5)/2nd 

Unlock (6)

16

Aux 4 Linking

No linking

Link to Arm

Link to Disarm

Link to Arm/

Disarm

Link to Remote 

Start Only

17

Aux/Trunk Output type

Validity

Off

2nd unlock

1.  One-time Bypass

1.  Off: One-Time Bypass is not available

2.  On: the One-Time Bypass feature will defeat Passive Arming once and, if Armed by remote control, 

will defeat  Comfort Closure and Aux outputs linked to Arming

2.  Nuisance Prevention

1.  On: sensors that trigger excessively will be defeated until they have been stable for more than one 

hour

2.  Off: sensors will not be defeated if triggered excessively

3.  Override Pulse Count

•  1-5: sets the number of presses (1-5) on the Control Button required to override the alarm system

4.  Door Trigger error Chirp

1.  On: if the door trigger is active when arming, the siren will emit a chirp and a message will be sent 

to the 2way remote control as an alert

2.  Off: an active door trigger when arming will not create an alert output 

5.  Ign-controlled Dome light

1.  On: the dome light output will activate when the ignition is turned off

2.  Off: the dome light output will not activate when the ignition is turned off

Summary of Contents for Clifford 510.4X
























Reviews: