Directed Electronics Automate 210D Owner'S Installation Manual Download Page 52

Page: 52 / 55

Cut along dotted line and f

old f

or a quick and eas

y r

efer

ence to k

eep in y

our pur

se or w

allet.

✂

QUICK REFERENCE GUIDE:

To arm the system using your remote

■

Pressing

for one second will arm the system. The parking lights

will flash once and the siren will chirp once.

To disarm the system using your remote

■

To disarm the system, press

for one second. The parking lights will

flash twice and the siren will chirp twice to confirm the system is dis-
armed.

To enter panic mode using your remote

■

Press

for 1.5 seconds. The parking lights will flash and the siren

will sound for 30 seconds.

QUICK REFERENCE GUIDE:

To arm the system using your remote

■

Pressing

for one second will arm the system. The parking lights

will flash once to confirm the doors are locked.

To disarm the system using your remote

■

To disarm the system, press

for one second. The parking lights will

flash twice to confirm the system is disarmed.

To enter panic mode using your remote

■

Press

for 1.5 seconds. The parking lights will flash and the siren

will sound for 30 seconds.

✂

Summary of Contents for Automate 210D
























































Search results

Summary of Contents for Automate 210D

Reviews:

Related manuals for Automate 210D

Brands by name

Popular brands

Directed Electronics Automate 210D, Owner'S Installation Manual

Search results

Summary of Contents for Automate 210D

Reviews:

Related manuals for Automate 210D

Brands by name

Popular brands