![background image](http://html1.mh-extra.com/html/directed-electronics/automate-210d/automate-210d_owners-installation-manual_2507162025.webp)
22
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
ttrra
an
nssm
miitttte
err//rre
ec
ce
eiivve
err
lle
ea
arrn
n rro
ou
uttiin
ne
e
The system comes with 2 transmitters that have been taught to
the receiver. The receiver can store up to 4 different transmitter
codes in memory. Use the following learn routine to add trans-
mitters to the system or to change button assignments if desired.
The Valet®/Program switch, plugged into the blue port, is used for
programming. There is a basic sequence of steps to remember when-
ever programming this unit: Door, Key, Choose, Transmit and
Release.
1.
O
Op
peen
n aa vveeh
hiiccllee d
doooorr.. ((The GREEN wire,
H1/5, or the VIOLET, H1/7 must be connect-
ed.)
2. K
Keeyy.. Turn the ignition to the ON position.