21
© 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d
programming options
Programming options control what your system does during normal
operation, and require few or no additional parts. However, some may
require additional installation labor.
Following is a list of the program settings, with the factory settings in bold:
z
Autoarming on or autoarming
off
of the alarm : Automatic
arming 30-seconds after ignition turned off.
z
Arming/disarming confirmation siren chirps off, loud or
quiet
. The siren arm/disarm chirps can be either full volume,
6 decibels quieter, or turned off completely.
z
Panic mode:
on
/off.
z
Siren duration:
30
/60/90 seconds.
z
Set PIN code: Allows you to enter your own PIN code, over-
writing the factory PIN code.
z
Siren tones: The output of the siren consists of six different
tones in sequence. Any of these tones can be eliminated, result-
ing in a unique, easily identifiable siren sound.
z
NPC
®
: Nuisance Prevention
®
Circuitry
on
/off. Inhibits false
alarming if a protective zone repetitively alarms.
z
Remote Valet:
on
/off.
z
Reset settings to default (except for PIN code)
z
New remote learn features: Allows programming individual
transmitter channels to custom configurations. Refer to
User
Selectable Features Descriptions - Column Three.
z
Clear all Remotes: Removes all remote controls from memory.
