7
CONDITION
POSSIBLE SOLUTIONS
No display image/LED light on
Extender Receiver is OFF
Is the power adapter connected? If a power strip is used,
is the ON/OFF switch set to “ON” position?
No display image/LED light ON
Transmitter & Receiver are ON
Is the display unit turned on? Is the display unit set to
the correct video input? Are your HDMI™ and/ or
Cat5e/6 cables damaged? Are the cables connected
properly? Please refer to the connection diagram.
Image without sound
Note
: That units connected with a
DVI adapter will not have sound –
DVI is a video-only connection
standard
1- Check the display unit’s volume
2- Turn off the HDMI™ source (DVD, PS3 etc.) and power
on again. If there is still no sound, then:
3- Unplug the power adapter on the Extender transmit-
ter and receiver unit for 10 seconds and then plug
in again.
4- Repeat step 2 again if still not working.
Note: Some devices not HDMI™ certified may have
compatibility problems.
Poor picture quality
(snow, sparkles, banding, etc)
Examine the HDMI™ and/or Cat 5e/6 cable and replace
with new cables if possible. To ensure that the extender
units are operating correctly, test with the shortest
HDMI™ and/or Cat 5e/6 cable possible. Longer or
inferior/ damaged cables will compromise image qual-
ity. Use only Cat5e/6 UTP cable with cross stand inside
for the best results possible.