5.0
T
ROUBLESHOOTING
If this DirectConnect
®
product does not appear to be functioning, please make
certain that the source and the destination device connected to the unit are
functioning correctly. If other problems exist please check the conditions below carefully.
In the event of problems, first make certain that the single Cat5/6 cable is not longer than
specifications. Next, make certain that the HDMI™ Extenders are receiving power.
If all is well in these areas, remember that HDMI™ devices communicate with one
another so the source devices and destination device must be fully HDMI™ capable. If
you experience problems using the HDMI™ Extender, you should attempt to determine
what is wrong by attaching each of the source devices – one at a time – directly to the
destination device using the same cables you are using with the expanded system.
This is a way of determining if the problem is due to bad cables or a problem with the
other devices. If you are unable to obtain a signal using this simplified path, double
check the cables, the source device(s) and/or the destination device.
CONDITION
POSSIBLE SOLUTIONS
No display image/LED light on
Extender Receiver is OFF
Is the power adapter connected? If a power strip is used, is
the ON/OFF switch set to “ON”
position?
No display image/LED light ON
Transmitter & Receiver are ON
Is the display unit turned on? Is the display unit set to the
correct video input? Are your HDMI
™
and/ or Cat5e/6
cables damaged? Are the cables connected properly?
Please refer to the connection diagram.
Image without sound
Note
: That units connected with a DVI
adapter will not have sound –
DVI is a video-only connection
standard
1-
Check the display unit’s volume
2- Turn off the HDMI
™
source
(DVD, PS3 etc.)
and power on
again. If there is still no sound, then:
3- Unplug the power adapter on the Extender transmitter
and receiver unit for 10 seconds and then plug in again.
4- Repeat step 2 again if still not working.
Note:
Some devices not HDMI
™
certified may have compatibility problems.
Poor picture quality
(snow, sparkles, banding, etc)
Examine the HDMI
™
and/or Cat 5e/6 cable and replace with
new cables if possible. To ensure that the extender units
are operating correctly, test wi
th the shortest HDMI™
and/or
Cat 5e/6 cable possible. Longer or inferior/ damaged cables
will compromise image quality. Use only Cat5e/6 UTP cable
with cross stand inside for the best results possible.
DO NOT open the HDMI™ extender boxes. There are no user repairable parts inside.
Once opened, DirectConnect
®
is not responsible. For other problems, please
contact DirectConnect
®
at 800.531.3224. http://www.directconnecthome.com
5.1
N
ON
-HDCP-C
OMPLIANT
D
EVICES
If a DVI device does not appear to work, make certain that the device is HDCP-compliant. A
non-HDCP-compliant DVI device will not work with a signal that has HDCP encoding present.
Notice:
DirectConnect
®
reserves the right to make changes in the hardware, packaging
and/or any accompanying documentation without prior written notice.
1.0
SPECIFICATIONS
Signal Inputs/Output
Signaling rates
1.65Gpbs
x 3
Signal Inputs/Output
Input Video Signal
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Maximum Single Link Range
1920X1080P
Output Video
HDMI™+ HDCP1.0/1.1
Video format supported
DTV/HDTV
480i/576i/480p/576p/720p/1080i/1080P
Digital Signal I/O
HDMI™ Compliance
Yes - standard
Operating Frequency
Frequency
Up to 165MHz
Vertical Frequency Range
50/60Hz
Video Amplifier Bandwidth
1.65Gpbs/165MHz
Resolutions
(HDTV)
Interlaced(50&60Hz)
480i,576i,1080i
Progressive(50&60Hz)
480p,576p,720p,1080p
Mechanical
Size(H-W-D)
3.94 ‖ x 2.56― x 0.98‖
(100 x 65 x 25mm)
Weight(Net)
13.58oz.
(385grams)
Warranty
Limited Warranty
2 Year Parts and Labor
Environmental
Operating Temperature
32
0
F - 158
0
F (-
0
0
C + 70
0
C)
Operating Humidity
10% to 85 % RH (no condensation)
Storage Temperature
14
0
F - 176
0
F (
-10
0
C + 80
0
C)
Storage Humidity
5% to 90% RH (no condensation)
Power Requirement
5 Volt DC Power Adapter
5V DC@2A
Power Consumption: 5 Watts maximum
Accessories
(2) 5 Volt DC Power Adapter
UL,CE, & FCC
100-240v, 50-60Hz to 5.0vdc, 2000mA
User Manual
English Version
Note: Specifications are subject to change without notice
3 / 8
6 / 8