2.0
F
EATURES
This high-performance DirectConnect
®
Extender via CAT5e or CAT6 with cross
stand inside
UTP cable has many benefits and features that enable it to perform in a
superior manner. Among those benefits and features you will find:
HDMI™ cable length is fixed and unchangeable after it is produced. HDMI™
connectors can only be soldered or terminated by the professional
manufacturers that produce them, the installer and/or users cannot modify by
themselves. However Cat5e or Cat6 with cross stand inside UTP cable is
readily available and may be processed easily by the installer and /or end user.
HDMI™ cables are not easy to bend and the connectors are large to pull
through conduit and the wall. However, Cat5e/6 cable has no such problems.
Uses Cat5e or Cat6 with cross stand inside UTP cable to substitute for
HDMI™
cable to achieve long distance transmission without signal loss.
Auto-adjustment of feedback, equalization and amplification.
Supports up to1080p, uncompressed 2 channel audio, and IEEE-568B standard.
3.0
P
ACKAGE
C
ONTENTS
Before attempting to use this DirectConnect
®
unit, please check the packaging and
make sure the following items are contained in the shipping carton:
DirectConnect
®
HDMI™ Extender One
(1)
Transmitter and one
(1)
Receiver
Two
(2)
5 Volt DC Power Adapters
User's Manual
Note:
Please retain the original packing material in case you need to return the unit. If you
find any items missing, contact DirectConnect
®
immediately (800.531.3224). Please have
the model number, serial number, and invoice available for reference when you call.
4.0
C
ONNECTION AND
O
PERATUION
1)
Connect the HDMI™ signal source to the sender unit input port
(HDMI™ IN)
* Please refer to connection diagram section
(Page 5)
.
2)
Connect a single Cat-5e or Cat6 with cross stand inside UTP cable between
the transmitter and receiver units. Please use EIA/TIA-568 termination (T568B).
3)
Connect the HDMI™ display device to the receiver unit output port
(HDMI™ OUT)
4)
Insert the DC side of the 5v power supply into the transmitter and
receiver
before connecting to the wall outlet. Then connect the AC side of the power
supply into the wall outlet
(ideally the AC power should be surge suppressed and filtered)
.
Attention:
Insert/Remove cables gently
& avoid twisting/kinking your HDMI™ cables.
4.1
P
ANEL
D
ESCRIPTIONS
HDMI™ Extender
Transmitter
1 -
HDMI™ Input
2
- Cat5 Output
4
- DC Power Input
HDMI™ Extender Receiver
3 - HDMI™ Output
2
–
Cat5 Input
4
–
DC Power Input
Please use EIA/TIA-568 termination (T568B) and do not apply DC power to unit until all connections are complete.
4.2
C
ONNECTION
D
IAGRAM
1080P Single Cat6
164 feet
(50 meter)
Note: In order to achieve the highest transmission quality, please choose unshielded Cat5e or Cat6
and terminate with metal RJ-45 connectors
.
Higher-resolutions and longer transmission distances
require low skew cables for the best performance.
1. The cables with lower quality will not achieve the perfect transmission effect and long distance.
2. Theoretically the function of this product is normal when adopting short distance transmission.
If this product cannot transmit long distance, there may be quality problems in the transmission cables.
5 / 8
4 / 8
Please Note: HDMI™ Cable length
should be 6 feet or less