26
www.SecurityCamerasDirect.com
SECTION 3: DVR SETUP
14. Click the confirm icon (
a
) in the lower right corner of the screen, then click the
Confirm
button in the
Note
window.
15. If you setup the record schedule for a single channel, repeat this procedure to setup the other camera channels.
16. Press the
MENU
button on the front panel to return to the
RECORD
tab.
3.4 Video configuration settings
The video configuration settings affect the appearance of the camera video on the monitor. The configuration can be se setup for
each individual camera, or the same settings can be applied to all cameras.
1. Click the
Settings
icon on the Tool Bar. The SYSTEM tab window will open.
2. Click
VIDEO
to open the VIDEO settings menu.
3. Click the
q
icon at the right end of the
CHANNEL
line. From the dropdown list, select the number of the camera channel you
want to setup, or select ALL to configure all channels.
4. Initially, camera channels are named CH1 .. CH4. You can change the name of the channel by clicking on the entry field on the
NAME line to open a virtual keyboard. Use the keyboard to enter a new name, if needed, then click the
=
button to close the
keyboard.
5. Click the
q
icon at the right end of the
POSITION
line. The position option selects where the camera channel NAME appears
on the live display. Choose one of the flowing: U-L (upper left), D-L (lower left), U-R (upper right), or D-R (lower right).
6. Click the
q
icon at the right end of the
LIVE
line. In the dropdown list, select
ON
(to view video from the camera on the Live
screen), or
OFF
.